







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Showers & Shower Remodeling in Fairfield, CA
A walk-in shower remodel in Fairfield typically runs $6,200 to $14,500, and most projects are finished in 5 to 12 working days once materials are on site. A walk-in shower removes the curb or drops it to a low threshold, so you step in flat instead of climbing over a tub wall, and it’s built around a waterproofed substrate rather than a pre-fab pan dropped into a hole. That distinction is the whole job. We’re Bradford Remodeling Co Fairfield, and we build showers the way The Garrison Standard requires: a written price before any work starts, background-checked technicians on every job, and the 365-Day Done Right Promise on the finished work. Call (833) 998-3242 for a free estimate, and a live person answers.
This page covers the shower itself. For the full room – vanity, flooring, lighting, layout – start with our Bathroom Remodeling service, or read the Fairfield-specific version at Bathroom Remodeling in Fairfield.
Key Takeaways
- Walk-in shower remodels in Fairfield usually land between $6,200 and $14,500 depending on tile, glass, and whether the drain has to move.
- Every price is written before demo starts. No numbers that move at the door.
- The 365-Day Done Right Promise covers the full year after completion. If the work fails inside that window, we come back and correct it at no charge.
- Our technicians have up to 22 years of experience with curbless pans, linear drains, and large-format tile.
- Call (833) 998-3242 any hour. A real person picks up.

When You Need Walk-In Showers & Shower Remodeling
Fairfield showers take a beating that showers in drier climates don’t. The Solano County ground moves with seasonal shrink-swell, and that movement shows up first in tile grout lines and pre-fab pans. Here’s what we hear most from homeowners in Cordelia, Green Valley, and the older streets near downtown.
- The tub wall has become a hazard. A family member is recovering from knee or hip surgery, or a parent is visiting more often, and stepping over a 17-inch tub apron is no longer safe. A low-threshold pan with a proper grab bar location solves it without gutting the room.
- The pre-fab shower pan has cracked or gone spongy. This is common in Fairfield homes built in the 1980s and 1990s. When the fiberglass pan flexes underfoot, the seal at the drain collar usually went first, and water has been migrating into the subfloor for a while. We open it up and check the substrate before we quote tile.
- Grout lines keep failing in the same spots. Hairline cracks that return every 18 months usually mean movement, not bad grout. A properly built shower with a decoupling membrane and correct substrate handles that movement instead of fighting it.
- You want the room to feel bigger without moving walls. A glass walk-in shower opens up a 5×8 bathroom in a way a shower-over-tub never will. We see this constantly in the townhomes off Air Base Parkway.
- The shower is moldy despite regular cleaning. Recurring mold at the caulk line and bottom corners usually points to a failed waterproofing layer behind the tile, not a cleaning problem. That’s a rebuild, not a re-caulk.
- You’re aging in place. Zero-threshold entry, a fold-down bench, and blocking installed in the walls for future grab bars. We frame the blocking during the rebuild so it’s there when you need it.
Our Walk-In Showers & Shower Remodeling Process
This is the sequence we run on every shower, whether it’s a straight swap or a full rebuild. It’s written down, and it’s the same on job one and job fifty.
- On-site measure and written scope. We measure the existing pan, check the drain location and the valve rough-in, and look at what’s behind the tile where we can. You get a written price for the full scope before anything is ordered or demoed.
- Material selection against documented specs. Tile, glass, valve, and drain get selected from brands with published specs and manufacturer warranties. We work with a documented roster that includes Therma-Tru doors and Mr-Glass shower enclosures, and we hand you the spec sheets so nothing is left to guesswork.
- Demo and substrate inspection. The old pan and tile come out. We inspect the studs and subfloor for water damage and rot, and if we find something that changes the scope, you get a written change order before we proceed. No surprise line items at the end.
- Rough-in and waterproofing. Valve and drain get set to the new layout, then the pan is built and the waterproofing membrane goes in. On a curbless job the floor is recessed or ramped to get the drain slope right, and this is the step that decides whether the shower lasts. It gets a flood test before tile goes down.
- Tile, glass, and fixtures. Tile set, grout, caulk at the movement joints, then the glass enclosure templated and installed. Fixtures go in from Kohler or Moen depending on what you selected.
- Walkthrough and signed guarantee. Clean site, documented scope, and a signed 365-Day Done Right Promise in your hand. We walk the shower with you and confirm the drain runs, the door seals, and the valve works before we call it done.

Walk-In Showers & Shower Remodeling Pricing in Fairfield
Here are real ranges for Fairfield. These are the numbers we quote, not a teaser to get a salesperson in the door.
| Scope | Typical Price Range | Notes |
|---|---|---|
| Pre-fab pan and surround replacement | $3,400 – $5,800 | Same footprint, no drain move, acrylic or fiberglass |
| Tile shower rebuild, existing footprint | $6,200 – $9,400 | New pan, waterproofing, tile, standard glass |
| Walk-in with low-threshold pan and bench | $9,000 – $12,800 | Frameless glass, blocking for grab bars |
| Curbless (zero-threshold) with linear drain | $11,500 – $14,500 | Floor recess or ramp, premium glass, large-format tile |
| Drain or valve relocation | Add $900 – $2,400 | Depends on slab vs. raised floor and distance moved |
| Water damage or rot repair | Add $600 – $3,000 | Quoted in writing after demo inspection |
What moves you up or down that table: tile size and material, whether the glass is framed or frameless, whether the drain has to move, and what we find once the old pan comes out. Large-format tile over a curbless pan takes more layout work than a 4-inch ceramic over a pre-fab base. A frameless enclosure from a fabricator like ViewLux or Mr-Glass costs more than a framed unit but is templated to your opening, so the fit is exact.
Every estimate is free, and every price is written before work starts. Call (833) 998-3242 and we’ll get a measurement on the calendar.
Safety Notes We Won’t Skip
A shower rebuild involves the waterproofing layer, the drain connection, and the electrical circuit for any lighting or fan in the wet zone. Getting the pan slope or the membrane wrong is a slow-motion leak that shows up as a soft subfloor two years later. That’s why we flood-test before tile, and it’s why we don’t hand a homeowner a bag of thinset and a “here’s how” video. If your shower shares a wall with a panel or has a fan on the same circuit, that work goes to a licensed electrician. Our job is the tile, the pan, and the waterproofing done right the first time.
FAQs – Walk-In Showers & Shower Remodeling
How much does a walk-in shower remodel cost in Fairfield?
A walk-in shower remodel in Fairfield runs $6,200 to $14,500, with most jobs landing around $9,000 to $11,000. The low end is a tile rebuild on the existing footprint; the high end is a curbless pan with a linear drain and frameless glass. Call (833) 998-3242 for an exact quote on your bathroom – estimates are free and the price is written before work starts.
Can you convert my tub into a walk-in shower?
Yes, and it’s one of the most common jobs we run in Fairfield. A standard tub alcove is about 60 inches long by 30 to 32 inches deep, which is a workable walk-in footprint. The valve usually stays where it is, the drain may need to shift a few inches, and the surround gets rebuilt with a waterproofed substrate and new tile. We quote the conversion in writing after we measure.
How long does a walk-in shower take to install?
Most walk-in showers take 5 to 12 working days once materials are on site, depending on the scope and the tile. A pre-fab swap is often 3 to 4 days. A curbless rebuild with a linear drain and custom glass runs longer, and the glass template adds a few days between tile and final install. Call (833) 998-3242 with your address and we’ll give you a realistic schedule, not an optimistic one.
Is a curbless shower worth the extra cost?
A curbless shower is worth it when someone in the home has mobility concerns now or likely will, or when you want the room to feel larger. It costs more because the floor has to be recessed or ramped to get the drain slope right, and that’s real framing and waterproofing work. If no one needs the flat entry and the budget is tight, a low-threshold pan gets you most of the way for less. Either way, the 365-Day Done Right Promise covers the whole job for a full year.
Do you offer a written guarantee?
Yes. Every completed shower carries a written 365-Day Done Right Promise. If the work fails inside that year – a leak, a failed grout joint, a door that won’t seal – we come back and correct it at no charge. That’s the whole guarantee, stated plainly, and you hold it in writing when we close out the job.
Bradford Remodeling Co Fairfield is part of the Garrison Partners family and operates as an independently owned and operated business held to The Garrison Standard. Every project gets a written price before work begins, background-checked technicians arrive on your schedule, and a live person answers the phone around the clock. Ready to talk about your shower? Call (833) 998-3242 for a free estimate.
Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield.


