







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Bathroom Remodeling: The Fairfield Owner’s Guide
Unilock bathroom remodeling in Fairfield typically runs $9,000 – $28,000 installed, and we can usually get a written estimate into your hands without a site visit for standard configurations. If you’re here because a Unilock surface, trim piece, or fixture has cracked, lifted, or failed, you already know the symptom matters more than the label.
Most Fairfield homeowners discover the problem after a shower or tub surround starts losing a grout line, a floor tile rocks underfoot, or a vanity top has a hairline crack spreading from the sink cutout. The work was installed, the damage appeared, and now you need someone who can tell you what failed, what it costs to correct, and whether the fix is a repair or a rebuild.
Key Takeaways
- Installed bathroom remodeling in Fairfield runs $9,000 – $28,000; small bathrooms land $5,000 – $12,000.
- Unilock is a real product line with specific spec tolerances – measurement matters before you order anything.
- We’re an independent contractor, not affiliated with Unilock.
- Written price before work starts, backed by the 365-Day Done Right Promise.
Which Unilock Models This Applies To

Unilock is best known for hardscape – pavers, retaining wall systems, and step units – and some of its product catalog has been adapted into wet-area applications (shower bases, floor tile, wall trim) through licensed distributors in California. That matters because the part you’re replacing isn’t a simple off-the-shelf item at a big-box store: it’s a specific SKU with a specific dimensional tolerance and a specific finish code, and if you order the wrong variant it won’t align with your existing substrate, drainage slope, or transition joint.
To identify the right part on your Unilock bathroom installation, look for three things: a manufacturer label on the back of a loose piece or inside the vanity cabinet (usually a small foil or paper tag), a stamped or engraved code on the underside of the trim or threshold, and a measurement of the piece itself in both dimensions to the nearest 1/16 inch. If the label is gone, the measurement is your reference – Unilock publishes spec sheets for each series by dimension.
On the OEM-versus-aftermarket question: for finish-critical pieces (threshold, trim, transition strips, shower curb caps), stay with the OEM part or an exact-match licensed equivalent. For non-finish accessories (a shower drain grate, a mounting bracket), a quality aftermarket match is fine and saves money. What fails most often on these installations isn’t the Unilock product itself – it’s the substrate or the waterproofing underneath. The part that looks failed is sometimes just the top layer telegraphing a deeper problem.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Bathroom Remodeling Is Failing
Symptoms cluster, and knowing which symptom you’re seeing narrows the diagnosis fast:
- Hairline cracks along grout lines or at tile-to-tile joints. Usually a substrate deflection problem – the framing or backer board is moving under load. If the crack follows a line, it’s a movement issue, not a product defect.
- Rocking or hollow-sounding floor tile. Thin-set that lost its bond, often from moisture intrusion through a failed grout or sealant joint. In Fairfield’s climate, a poorly sealed shower surround can telegraph that failure across 3 – 4 sq ft in a single season.
- Grout crumbling at wall-to-floor transitions. Normal grout isn’t flexible. A rigid grout in a joint that flexes will always crumble – the fix is a flexible sealant at that joint, not more grout.
- Water staining or soft spots around the shower curb or tub apron. This is the warning sign to take seriously. If the curb is compromised, the waterproofing underneath likely is too, and the repair scope grows with every week it sits.
- A vanity top with a crack radiating from the sink cutout. Most often from an undermount sink installed without proper support or from an impact. Cracked stone or composite at the cutout is a safety concern and a replacement, not a repair.
We see the curb and shower-base failures most often in older Fairfield homes where the original installation used a pre-sloped foam pan without a reinforced waterproofing membrane. It holds for a while, then a small shift opens a seam, and water finds the substrate.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fairfield bathroom remodeling costs break down by scope. Here’s what we quote, installed:
| Scope | Installed Price Range |
|---|---|
| Full bathroom remodel (Unilock surfaces + fixtures) | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Shower replacement | $3,000 – $8,500 |
| Bathroom vanity installation | $800 – $3,000 |
What drives the range: the substrate condition under the failed surface (soft framing or rotted backer board adds labor), the size of the wet area, whether the plumbing rough-in needs to move, and the finish level of the Unilock piece and any companion fixtures. Every job gets a written, line-item price before work begins – parts, labor, and any permitted scope are separate lines. The 365-Day Done Right Promise covers every project for a full year: if the work fails inside that window, we return and correct it at no charge.
DIY or Call Us?
What you can safely check on your own: confirm the part code (label or measurement), take photos of the failed area with a tape measure in frame, and dry the area before anyone arrives. What you should not attempt: pulling a shower pan or threshold yourself if the waterproofing layer is compromised, resetting tile over a substrate that may still be wet, or repairing a cracked vanity top at the sink cutout – those are the points where a small repair turns into a five-figure rebuild. We won’t claim a DIY path that creates a bigger problem later.
What we can do instead: send a background-checked, uniformed technician to diagnose the actual failure, give you a written scope and a firm price, and only then schedule the install. Our technicians have up to 22 years of experience with wet-area construction and Unilock-compatible assemblies. Call (833) 998-3242 and we’ll get you a written estimate – usually a short conversation gets you the number you need to decide.
FAQs

A properly installed Unilock surface over a sound substrate should hold 15 – 25 years with normal maintenance – the product itself is durable. What fails first is the waterproofing layer underneath it, usually within the first 8 – 12 years in a shower application, which is why we inspect the substrate before quoting a reinstallation. Call (833) 998-3242 to schedule an inspection – estimates are free.
Often yes, if the failure is localized – a cracked trim piece, a single loose tile, a crumbling joint – and the waterproofing is still sound. We won’t recommend a patch-and-repair on a shower curb or pan if the substrate has taken water, because the repair won’t hold. Call (833) 998-3242 and we’ll tell you honestly which path makes sense for your Fairfield home.
A vanity top replacement or single-piece repair is usually a half-day to a full day on site. A shower replacement or tub-to-shower conversion is typically 3 – 7 working days, depending on plumbing changes and curing time. We schedule the work with a written start date and a written completion date before anything starts – no rolling “sometime next week.” Call (833) 998-3242 for a scheduling window that fits your project.
We source through Unilock’s licensed California distributors and match the exact series and finish code from your label or measured dimensions. We don’t carry parts on a truck and don’t stock inventory – the part is ordered to your spec and delivered to site before install day. If an exact match isn’t available, we’ll show you the closest authorized equivalent and the price difference in writing before you commit.
You’re welcome to ask us about KraftMaid cabinetry for the vanity surround, or a Cambria or Silestone top – those are the same documented brands we install on every full bathroom scope, and each carries a manufacturer spec and warranty that backs our own written promise.
Bradford Remodeling Co Fairfield is an independent service provider. We are not affiliated with Unilock, and we install Unilock-compatible assemblies as one of several product lines in our documented brand roster.
Call (833) 998-3242 for a free estimate. A live person answers 24/7 – not a voicemail, not a callback queue – and we’ll give you a written price before any work starts, backed by the 365-Day Done Right Promise and The Garrison Standard.
Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield and nearby areas.












