







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Home Additions & ADU: The Fairfield Owner’s Guide
We build Cambridge Pavers-compatible home additions and ADU projects in Fairfield, and most of the failed-part calls we run are actually hardscape-interface failures, not the addition itself. The typical fix lands between $45,000 and $130,000 installed for a full addition, and the connector, base, or drainage detail that drove the call is usually corrected within the larger scope. We are an independent service provider and not affiliated with Cambridge Pavers.
Owners usually find the problem the same way: a paver walkway that walks away from the new slab after a wet winter, a step that drops a half inch at the transition to the driveway, or an ADA-compliant entry that pools water against the door threshold. In Fairfield, our clay-heavy soils and the wet/dry swing between January and July show these failures fast. We see them most often in Cordelia, Green Valley, and the older Rancho Solano pocket where original driveways never accounted for a new structure’s weight and drainage. The Cambridge Pavers part that failed is rarely the paver itself; it’s the bedding, edge restraint, or the base course under the transition.
Key Takeaways
- Most “Cambridge Pavers failures” we see in Fairfield are base and edge-restraint problems, not bad pavers.
- Budget $45,000 – $130,000 for the addition; a standalone ADU runs $90,000 – $220,000.
- Cambridge Pavers requires a compacted aggregate base and a hard edge restraint; skipping either is the #1 cause of settlement.
- We fit the correct Cambridge Pavers-compatible component to your exact product line and site detail, with a written price before work starts.
Which Cambridge Pavers Models This Applies To

Cambridge Pavers is a paver and hardscape manufacturer, not an addition manufacturer, so this page covers the Cambridge Pavers interface components that show up on a home addition or ADU in Fairfield: the paver field, the edge restraint (the rigid border that holds the field from spreading), the bedding layer (the sand or aggregate the pavers sit on), the base course (the compacted gravel below that), and the drainage detail at the structure line. Cambridge’s product lines vary by thickness and face profile, and the correct restraint and base spec changes with paver thickness. A 2 3/8-inch Cambridge pavers field can tolerate a different base course than a thicker 3 1/8-inch product, and mixing specs across a transition is where failures start.
Identify the part in three steps: measure paver thickness at a straight edge, read the Cambridge product name if it’s stamped or the original job packet survived, and photograph the edge restraint and base at the transition. If you can’t confirm the series, don’t guess. OEM Cambridge Pavers edge restraint is the safest match because the profile and length are engineered to the company’s thickness range. A quality aftermarket restraint from a documented brand can work, but only when the profile matches. We fit OEM-spec or named-brand equivalents, and we don’t carry parts on a truck because every Cambridge Pavers detail is site-specific.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambridge Pavers Home Additions & ADU Is Failing
- Pavers heaving or rocking near the addition: water is trapped under the field and lifting the base, usually because the drainage at the structure line was pitched the wrong way or the base course wasn’t compacted in lifts.
- A visible gap at the edge restraint: the restraint is failing, and the pavers are spreading outward because the edge wasn’t set deep enough or the restraint spec didn’t match the paver thickness.
- Sand washing out of joints after a Fairfield winter: the bedding layer is too thin, or the base is draining water into the joints instead of away from the addition.
- Step or threshold settling at the door: the transition slab wasn’t tied to the addition’s footing, so the two structures are settling at different rates in our expansive clay soils.
- Efflorescence (the white haze) that returns every spring: moisture is migrating up through the base, a sign the drainage detail is feeding water back into the field.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices for the Cambridge Pavers-compatible work tied to a Fairfield home addition run in this range. These are the market ranges we quote, and every one is a written price before work starts.
| Scope | Installed range |
|---|---|
| Home addition (full, Cambridge Pavers interface) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
| Paver patio installation | $3,500 – $11,000 |
| Paver driveway installation | $7,000 – $18,000 |
What drives the range: the length of Cambridge Pavers transition, the base repair depth, whether the edge restraint has to be reconstructed, and drainage. What’s included: parts and labor itemized, removal of the failed base, a compacted replacement base, a matched edge restraint, and site cleanup at close, with the 365-Day Done Right Promise covering the work for a full year.
DIY or Call Us?
You can safely photograph the transition, measure paver thickness, and note where water pools. That’s useful diagnostic detail. What you shouldn’t DIY: pulling the edge restraint or lifting a section of Cambridge Pavers field next to a structural footing. Lifting those pavers can shift the load path under the addition, and in our Fairfield clay, a small test pull can open a void you can’t see. A licensed crew with up to 22 years of experience has the compaction equipment and the base spec to put it back correctly the first time. We’re background-checked and uniformed, and a live person answers the phone 24/7.
Call (833) 998-3242 to schedule your free estimate on your Cambridge Pavers addition or ADU in Fairfield. We also handle KraftMaid cabinetry, Cambria and Silestone surfaces on the interior side, and we give you a written price before any work starts.
FAQs

A correctly installed Cambridge Pavers field, base, and edge restraint should hold 20+ years. Most failures we see at 8 – 12 years trace back to a base that wasn’t compacted in lifts or a restraint that didn’t match paver thickness. Call (833) 998-3242 for an exact quote on yours.
Sometimes. A local settlement at the transition can often be corrected by resetting the base and edge restraint without replacing the full field. If the failure runs the length of the addition line, replacement is the honest call. Call (833) 998-3242 to get a written scope on both.
A Cambridge Pavers base-and-restraint repair at one transition typically takes 2 – 4 days in Fairfield. A full addition with a Cambridge Pavers interface runs weeks to months depending on permits and inspection scheduling. You get a written schedule before work starts.
We match by measured paver thickness, the Cambridge product line, and the site detail, then order OEM or a named-brand equivalent with a manufacturer spec sheet. We don’t guess across an unidentified series. Call (833) 998-3242 and we’ll confirm the correct part before we quote.
Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield and nearby areas.












