A Bradford company - serving Fairfield, CA
A new rear addition with a vaulted beamed ceiling and tall windows
Barrette · Fairfield

Barrette Home Additions & ADU in Fairfield, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fairfield
A single-story rear room addition with tall windows and a new patio
A second-story addition that matches the existing roofline
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
An open living space after a whole-home remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A remodeled living room with built-in shelves around the fireplace
An open kitchen and dining area after a remodel
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Barrette Home Additions & ADU: The Fairfield Owner’s Guide

We build Barrette-compatible home additions and ADU (accessory dwelling unit) shells here in Fairfield, and the honest installed range runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. Barrette sits in the prefabricated shell and structural component category, so “replacement” means swapping failing panels, connectors or envelope sections rather than waiting on a dispatch. What you’ll notice first is a hairline crack that reappears after you patch it, a soft spot at the base of a wall, or a ceiling line that was straight two summers ago and isn’t now. That’s the point where an owner pulls out a phone and starts searching for answers.

Call (833) 998-3242

Which Barrette Models This Applies To

A garage converted into a guest room and home office

Barrette’s catalog covers modular and panelized addition kits in several footprint series, and the part number you need depends on which generation of the framing system your Fairfield home received. Barrette has revised its panel connectors and flashing details over the years, and the older profile will not seat correctly on a newer rail – a mistake we see about once a month in Fairfield when a homeowner orders by photo instead of by spec.

Here’s how to identify your part without guesswork. Find the data plate or stamped label on the panel edge or the interior face of the connector bay, usually within 18 inches of a corner. Photograph it straight on. Measure the panel height and the connector spacing with a tape, not a phone camera estimation, because perspective distortion throws measurements off by a quarter inch – enough to fail a fit. If the label is painted over, measure the fastener pattern center-to-center and bring those numbers to your call.

The OEM-versus-aftermarket decision matters more on Barrette than on most systems because the connector geometry is proprietary. Aftermarket equivalents exist for the gaskets, flashing tape and fasteners, and some are genuinely as good. For the actual structural connector itself, we spec OEM or an equivalent manufacturer with a published load rating. We don’t stock parts and we don’t carry inventory on a truck; every replacement component is sourced to your model number before we arrive. Bradford Remodeling Co Fairfield is an independent service provider and is not affiliated with Barrette.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Barrette Home Additions & ADU Is Failing

  • A crack that keeps regenerating after you fill it. Hairline cracks in the wall joint almost always trace back to movement at the connector, not the drywall itself. Patching the surface hides the symptom for a season and then it returns along the same line.
  • Water staining or a soft spot near the panel base or flashing line. Fairfield’s wet winters and dry summers create a repeated wet-dry cycle that stresses flashing tape and sealant. Once the flashing detail fails, water tracks behind the panel and the framing stays damp longer than you’d expect.
  • Doors and windows that no longer close cleanly. A window that sticks in July but not January is often a sign the panel or header has shifted slightly. It’s worth measuring the reveal on all four sides – uneven gaps point to structural movement, not a hardware problem.
  • A visible gap or daylight line at the connector joint. This is the one that shouldn’t wait. A daylight gap at a structural connector means the connection has loosened or the fastener has backed out, and it needs an assessment before the next storm.
  • Fastener heads that are rusting or recessed below the surface. Rust weeping at a fastener tells you water is reaching the connection. When a head sits below the face of the panel, the fastener has lost tension and is no longer doing its job.

Replacement Cost & What’s Included

A project lead and homeowner reviewing plans in a room under renovation

In Fairfield, a Barrette-compatible repair or section replacement typically runs $45,000 – $130,000 for a home addition scope and $90,000 – $220,000 for a full ADU build, depending on footprint, foundation requirements, and how much of the existing structure needs correction once we open it up. The low end assumes a straightforward panel swap on a sound foundation. The high end reflects a full addition or ADU with new foundation, framing, envelope, and finish work.

What drives the number: foundation depth and soil conditions around Fairfield, whether existing framing passes inspection once exposed, the panel series you’re matching, and finish level. We quote parts plus labor as separate line items so you can see what the component costs versus what the installation costs. Every project receives a written price before work begins, and all completed work is covered by the 365-Day Done Right Promise – if the work fails within that year, we return and correct it at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

There’s a safe list and a short list here. You can photograph the label, measure connector spacing, check for daylight at joints, and note where water is staining. That information saves time and helps us source the right part on the first pass.

What we’d steer you away from is any repair that involves opening the panel, removing or reinstalling a structural connector, or correcting a load-bearing header. That work involves the structural integrity of your home, and getting it wrong isn’t a cosmetic problem – it’s a safety one. A panel that’s carrying load without a properly rated and torqued connector can fail under wind or seismic movement. That is genuinely dangerous, and it’s the kind of work that should sit with a trained crew.

Call Bradford Remodeling Co Fairfield at (833) 998-3242 for a free estimate. We’ll give you a written price before any work starts.

FAQs

Footing forms with tied rebar for a home addition

Contact

If you’re looking at a Barrette addition or ADU in Fairfield and something has failed or needs correcting, call Bradford Remodeling Co Fairfield at (833) 998-3242 for a free estimate. You’ll get a written price before any work starts, a documented scope, and the 365-Day Done Right Promise standing behind the finished work.

Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A walk-in pantry with wood shelvingA powder room with botanical wallpaper and a stone sinkA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA stone counter, tile backsplash and open shelf after a kitchen remodel

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Fairfield

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Fairfield team

A local vetted partner works across Fairfield and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 998-3242
Local Service Coverage

Request a Free Estimate in Fairfield

Tell us what you need - Bradford Remodeling Co Fairfield responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch