







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Fairfield Owner’s Guide
If you’re pricing a Boral-spec addition or ADU in Fairfield, plan on $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached or attached ADU, installed with a written price before work starts and the 365-Day Done Right Promise behind it. The part that usually brings a Fairfield owner to this page is a failure they didn’t expect: a sill that’s gone soft, a wall assembly that won’t hold a window, a subfloor that’s started to give underfoot. Boral’s building products are good, and they still fail here when the assembly around them isn’t built to handle Fairfield’s hot, dry summers and the shrink-swell clay soils that run through much of Solano County.
We’re Bradford Remodeling Co Fairfield. We’re an independent contractor, not affiliated with Boral, and we install to Boral’s published specs rather than guessing at them.
Which Boral Models This Applies To

Boral covers a lot of ground under one name, and the “model” question depends on which product family your project touches. Boral TruExterior trim and siding, Boral Versetta Stone, and Boral cultured stone veneer each carry their own installation standards, and each one gets called out separately in an addition or ADU scope. The compatibility gotcha most Fairfield owners run into: Boral fiber-cement and composite trim is specified by actual thickness and profile, not by nominal board size. A 4/4 trim piece doesn’t measure a full inch, and mixing nominal sizing from an older project into a new Boral-spec assembly is how gaps open at the soffit and water starts finding its way in.
To identify what you have, read the stamp or ink mark on the back of the board or the carton label, which lists the product line and the profile number. Match that to Boral’s current published spec sheet before ordering. For the OEM-versus-aftermarket call: Boral-branded trim and veneer keep you inside the manufacturer’s warranty and the published spec, which matters on an addition where the inspector will want to see it. A quality aftermarket equivalent can work on a repair, but on new construction you want the Boral part and the paperwork that goes with it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
These are the symptoms that bring Fairfield homeowners to us, and the cause under each one:
- Soft or crumbling trim at the sill and soffit. Water has been wicking into the end grain for a season or more, and the paint is holding the board together while the wood behind it goes. In Fairfield’s dry heat, a failing paint film hides rot until the board gives.
- Hairline cracks at the veneer or stone joints. Movement in the framing or the substrate behind the veneer, often from soil movement under an addition that wasn’t tied down for shrink-swell clay. The crack is the symptom; the framing is the cause.
- Windows and doors that drag or won’t latch in the addition. The rough opening or header has shifted, which usually traces back to a substrate that swelled or a fastening pattern that didn’t match Boral’s spec.
- Staining or efflorescence on the new wall face. Water is getting behind the cladding and coming back out the wrong way, often because the weather-resistive barrier and flashing weren’t lapped in the right order.
- A hollow sound when you tap the wall or the finished floor. The layer under the surface has separated. On a Boral-clad wall or a subfloor, that means the fastening or the substrate prep was skipped.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fairfield pricing for the work this part lives inside:
| Scope | Installed Range |
|---|---|
| Home addition (Boral-clad) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion | $30,000 – $80,000 |
What moves you up the range: foundation work on expansive soil, a panel upgrade to carry the ADU’s load, and the number of windows and doors cut into the Boral-clad wall. What’s included is the whole assembly, not just the part: substrate, weather barrier, flashing, trim, and finish, plus permits pulled and inspected. You get a written line-item price before a tool comes out, a background-checked, uniformed technician on the job, and the 365-Day Done Right Promise covering the completed work for a full year. If the work fails inside that window, we come back and correct it at no charge.
DIY or Call Us?
You can safely walk the perimeter with a screwdriver and probe the trim and sill for softness, take photos of any crack or stain, and read the stamp on the board to identify your Boral line. That’s useful information. What goes wrong with DIY on an addition or ADU is that the failure is rarely the part itself. It’s the assembly behind it, and re-cladding a wall or tying a failing framing section back to a foundation on expansive clay is structural work that has to hold for the life of the building. A homeowner who replaces trim over a wet substrate has paid for the repair twice. Call (833) 998-3242 and we’ll give you a written price to make it right the once.
FAQs

A properly installed Boral-clad wall should hold its finish and structure for decades, but the realistic number depends on the assembly around it. In Fairfield’s climate, the part that ages first is the paint film and the sealant at the joints, not the Boral board. We spec and install to Boral’s published standards so the assembly, not just the part, holds up. Call (833) 998-3242 for a free estimate on your Fairfield project.
Sometimes yes, and we’ll tell you honestly which one you’re looking at. Localized trim or veneer damage with a dry substrate behind it can often be repaired in kind. Once the substrate or framing has failed, a patch just hides the problem, and replacement of that section is the honest fix. Our technician will show you what he finds before any work starts. Call (833) 998-3242 to schedule a free estimate.
A home addition typically runs several weeks to a few months depending on scope and permits, and an ADU takes longer. Your written price includes a schedule, and we don’t repackage the number mid-job. Fairfield permit review for an ADU can add time before the first board goes up, and we account for that in the plan. Call (833) 998-3242 and we’ll walk you through what your scope realistically looks like.
We buy Boral product through its published distribution channels, matched to your spec sheet, and we don’t claim to carry parts on a truck. That means the right part arrives for your job, with the manufacturer paperwork that backs the warranty. We install the full documented roster of brands we work with, including Boral, KraftMaid, Cambria, and Silestone, so specifications stay traceable. Call (833) 998-3242 for a free estimate.
If your Boral addition or ADU in Fairfield needs a straight answer and a straight number, we’ll give you both in writing. Our technicians have up to 22 years of experience, and every completed job carries the 365-Day Done Right Promise, with a live person answering the phone around the clock. Call (833) 998-3242 to schedule your free estimate, and we’ll put the price and the guarantee in your hand before a tool comes out.
Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield and nearby areas.












