







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Kohler Home Additions & ADU: The Fairfield Owner’s Guide
Adding a Kohler-outfitted addition or ADU in Fairfield typically runs $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a standalone ADU, depending on square footage, site conditions, and finishes. We install Kohler fixtures throughout the build and source each spec to the exact model line, not a generic substitute. Homeowners usually come to us after discovering the hard way that a failed fixture, a slow shower drain, or a leaking rough-in valve means the finish phase is stalled mid-project.
Kohler’s tolerances are tighter than most brands, which is why the wrong part or the wrong rough-in depth causes problems that don’t show up until the tile is set and the drywall is sealed. Getting the spec right before framing closes is the difference between a clean build and a callback.
Key Takeaways
- Home additions in Fairfield: $45,000 – $130,000 installed, Kohler fixtures included.
- ADU construction: $90,000 – $220,000, priced to the spec before a single tool comes out.
- Kohler rough-in dimensions differ from builder-grade brands – they must be confirmed at frame stage.
- Every Bradford project carries the 365-Day Done Right Promise: if it fails within the year, we make it right at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which Kohler Models This Applies To
Kohler makes a wide range of fixtures used in Fairfield additions and ADUs: shower valves from the Rite-Temp and MasterShower lines, wall-mount and deck-mount toilets, undermount and farmhouse sinks, freestanding tubs, and kitchen faucets. Each has its own rough-in spec, and that’s where the trouble starts.
The first gotcha is rough-in depth. Kohler thermostatic shower valves typically require a finished-wall depth between 2-3/4 inches and 3-1/4 inches from the stud face, depending on the valve body. Builder-grade valves often sit at a different depth. If your plumber used a generic rough-in guide instead of the Kohler spec sheet, the trim plate won’t seat flush and you’ll be patching tile.
The second gotcha is model identification. Kohler part numbers are stamped on the valve body, not the trim. Pull the trim and look for a model number cast into the brass. A photo of the label plus the model number gets you the right replacement the first time.
OEM versus aftermarket: for supply lines, seats, and gaskets, quality aftermarket parts from brands like Fluidmaster or Danco are fine and cost less. For trim, valve cartridges, and anything that affects water pressure or temperature regulation, stick with Kohler OEM. The cartridge geometry on a Kohler Rite-Temp or MasterShower valve is not interchangeable with aftermarket equivalents, and installing the wrong one causes leaks or a shower that won’t hold temperature. We spec Kohler, Moen, and the full documented brand roster – KraftMaid, Cambria, Silestone, and more – so every part is traceable from the manufacturer’s spec sheet.
Signs Your Kohler Home Additions & ADU Is Failing
- Shower valve won’t hold temperature. The pressure-balancing cartridge has worn out after 10 – 15 years. Kohler’s ceramic cartridges last longer than most, but Fairfield’s hard water accelerates mineral buildup inside the valve body. Rebuild or replace before it fails fully and scalds someone.
- Toilet runs or won’t stop filling. The fill valve or flapper has failed. This is usually a $20 – $40 part and a 30-minute job. Ignoring it wastes hundreds of gallons a month – Fairfield’s water rates make that sting.
- Slow or gurgling drain in a Kohler sink or tub. The pop-up assembly or the P-trap is clogged. Kohler’s pop-up drains use a specific lift rod length; a generic replacement often doesn’t seat right. Check the model number before buying.
- Water staining around the rough-in valve after tile is set. This means the rough-in depth was off from the start, and the seal behind the trim plate is compromised. This one needs the wall opened – it doesn’t fix itself.
- Freestanding tub drain leaks at the floor connection. Kohler’s freestanding tub drains use a specific flexible connector that can crack or work loose over time. A puddle under the tub after every shower is the tell.
If you’re seeing two or more of these at once, the problem is likely the rough-in, not the fixture. That’s a build-stage issue, not a parts counter fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For a Kohler fixture replacement or rough-in correction inside an addition or ADU project in Fairfield, the install cost depends on what’s being corrected. Here’s what drives the range:
| Work | Typical Installed Range |
|---|---|
| Shower valve cartridge replacement | $180 – $400 |
| Toilet fill valve and flapper | $120 – $260 |
| Rough-in valve depth correction (wall open) | $600 – $1,800 |
| Freestanding tub drain replacement | $280 – $650 |
| Full fixture swap (valve, trim, drain) | $450 – $1,200 |
Every price we quote is written before work starts – no numbers that move at the door. Parts and labor are broken out so you see exactly what you’re paying for. If the fixture is still under Kohler’s manufacturer warranty (Kohler covers most faucets and valves for life; check your spec sheet), we’ll help you file the claim and apply the replacement part toward your labor cost.
All work is covered by the 365-Day Done Right Promise. If it fails within the year, we come back and fix it at no charge. That’s not a sales line – it’s a written guarantee in your hand at job close.
DIY or Call Us?

You can safely check your model number, photograph the label, and shut off the water supply at the fixture. You can swap a toilet flapper, tighten a supply line, or clear a stopped-up drain with a plunger. Those are homeowner-level jobs.
Where DIY goes wrong with Kohler: pulling a pressure-balancing cartridge without the right puller, or digging into a rough-in valve behind tile. Get the cartridge wrong and you get a leak behind the wall – which means pulling tile, replacing substrate, and redoing the waterproofing. That’s a $600 – $1,800 repair instead of a $250 parts swap. And if you’re dealing with a gas line to a new Kohler water heater or a rough-in for a new fixture inside a permitted addition, stop. Those need a licensed trade and an inspection.
If you’re unsure whether your issue is parts or rough-in, call us at (833) 998-3242. We answer live, 24/7 – a real person, not a voicemail. We’ll tell you over the phone whether it’s a parts job or a build issue, free.
FAQs
Most Kohler ceramic cartridges and valve bodies last 15 – 20 years under normal use. Fairfield’s hard water shortens that to 10 – 15 years for shower cartridges and fill valves. Toilets and tubs can last 25+ years if the parts inside them are maintained. Call (833) 998-3242 for an exact quote on your fixture – estimates are free.
Yes, in most cases. A worn cartridge can be rebuilt with a Kohler OEM rebuild kit, which runs $40 – $90 in parts. A failed rough-in valve or a cracked valve body has to be replaced. We’ll diagnose which you’re dealing with before quoting the work. Call (833) 998-3242 to schedule a free estimate.
A cartridge swap or fill valve replacement takes 30 minutes to an hour. A full rough-in correction with the wall open takes a half-day to a full day, depending on tile and substrate. We schedule additions and ADU work on planned timelines – no rushed same-day promises on build work. Call (833) 998-3242 for your written estimate.
We pull the model number from the valve body or trim label, confirm it against Kohler’s spec database, and order the exact OEM part. If Kohler has discontinued the part, we identify the approved replacement per Kohler’s supersession list. No guessing, no generic substitutes on trim. Bradford Remodeling Co Fairfield is an independent contractor and is not affiliated with Kohler. Call (833) 998-3242 to start your free estimate.
Contact Bradford Remodeling Co Fairfield

If your Kohler fixture is failing, or you’re planning an addition or ADU in Fairfield and want the rough-in done right the first time, call (833) 998-3242 for a free estimate. We’ll give you a written price before any work starts, put it in plain language, and stand behind it with the 365-Day Done Right Promise. Live person on the phone, 24/7. Background-checked, uniformed technicians on every job. Our technicians have up to 22 years of experience. Serving Fairfield, Suisun City, Vacaville, and nearby areas.
Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield and nearby areas.












