







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Silestone Home Additions & ADU: The Fairfield Owner’s Guide
If you’re planning a home addition or ADU in Fairfield and want Silestone quartz surfacing in the kitchen or bath that comes with it, expect to budget $45,000-$130,000 for the addition and $90,000-$220,000 for a standalone ADU, with the Silestone tops typically falling into the $2,000-$6,500 countertop line. We’re an independent remodeling contractor, not affiliated with Silestone, and we install Silestone on additions across Fairfield with a written price before any work starts. Owners usually start digging into this when a countertop in an older addition chips at the edge, a seam opens up near the sink, or a remodel quote comes back with a surfacing line item that doesn’t match what was promised.
Which Silestone Models This Applies To

Silestone is engineered quartz, not natural stone, and it’s sold by color line rather than by a “model number” the way an appliance is. The names you’ll hear in Fairfield kitchens – Blanco Maple, Calacatta Gold, Eternal Statuario, Lyra, the Stellar series – are color families, and each carries its own slab dimensions and thickness options. Standard slabs run roughly 55 by 120 inches, but the actual part on your addition is the fabricated piece cut to your cabinet run, which is why matching an existing counter means matching the color line and the edge profile, not ordering a replacement slab off a shelf.
To identify what you have, check the fabricator’s sticker or the underside of the counter if it’s accessible, and measure the thickness. Silestone comes in 1.2 cm, 2 cm, and 3 cm, and the most common compatibility gotcha is a homeowner ordering a 3 cm piece to butt against a 2 cm existing top; the seam will never sit flush. On a Fairfield addition, we fabricate the new top to match the existing thickness and edge, then template on site. For other projects we also work with KraftMaid, Cambria, and Kohler, but on this page it’s Silestone and only Silestone.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Silestone Home Additions & ADU Is Failing
- Chipping at the edge or sink cutout. Quartz is hard but brittle, and a chip usually traces back to a knock against a thin edge or a cutout that was run too close to the seam. Once the chip is there, the surface is compromised and moisture can work into the substrate underneath.
- A seam that’s opening along the countertop. Fairfield’s hot, dry summers and the seasonal swing into wet winters cause cabinets and framing to move. If the seam was set with the wrong adhesive or the cabinets shifted, you’ll see a hairline gap that widens over a couple of seasons.
- Discoloration or a dull patch you can’t clean off. Silestone is non-porous, so stains shouldn’t soak in – if a spot won’t lift, it’s usually surface etch from a harsh cleaner or heat damage from a hot pan set down without a trivet.
- Sagging or a hollow sound when you tap the top. That points to the substrate or cabinet box, not the quartz itself. The slab is telling you the framing below it has failed or was never leveled.
- Cracking that radiates from a corner or cutout. A crack near an inside corner is a stress point, often from an undermount sink or cooktop cutout that left too little material. This is not a repair you can patch; it’s a re-fabrication.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

On a Fairfield addition, countertop installation runs $2,000-$6,500 installed, and that line covers templating, fabrication, the Silestone slab itself, the edge profile, and the set. It does not cover cabinet repair, plumbing disconnect and reconnect, or backsplash – a backsplash adds $800-$2,500, and a kitchen island with its own Silestone top runs $3,000-$10,000. A small kitchen remodel that includes the surfacing lands at $9,000-$20,000.
What drives the range: slab area, edge detail, number of seams, and whether the existing cabinets need leveling first. We give a written line-item price before work begins, so the fabrication and the install are separate, visible numbers – no moving figure at the door. Every install carries the 365-Day Done Right Promise: if a seam or set fails within a year, we come back and correct it at no charge.
DIY or Call Us?
You can safely check a few things yourself: shine a flashlight along the seam to see if it’s a gap or just adhesive haze, tap the counter to listen for hollow spots, and measure the thickness so you know whether you have 2 cm or 3 cm. What you can’t do safely is cut or re-set quartz. Silestone is heavy, it requires a wet saw and dust control for the crystalline silica, and a slab dropped on a toe or a hand is a genuine injury risk. Pulling a top off cabinets also means disconnecting the sink and any cooktop wiring – that’s the point where a homeowner gets in over their head.
If you’re past the checking stage, call us at (833) 998-3242 for a free estimate. We’ll template, fabricate, and set it, and you’ll have the written guarantee in hand at close.
FAQs

A properly fabricated and installed Silestone top should hold 15 to 20 years or more with normal use – it’s non-porous and resists staining and bacteria. The variables are edge exposure, seam quality, and heat; setting hot pans directly on it shortens the life. Call us for a free estimate if you’re unsure whether yours is worth keeping.
Small chips and surface etches can sometimes be repaired with a color-matched epoxy fill and polish, but cracks radiating from a cutout or a seam that has opened past a hairline need re-fabrication. A patch on a structural crack rarely holds. We’ll tell you honestly which side of that line your counter is on.
Once the slab is in, template-and-install is usually a few days end to end – one visit to template, a shop window for fabrication, and one install day. The unknown is the cabinet condition; if the boxes need leveling, that adds time. We give you a written schedule with the price.
We fabricate from slab stock at a documented stone supplier, matched to your color line and thickness, which is why identifying the existing color and edge profile first matters. We don’t carry parts on a truck and we don’t claim to stock Silestone locally – it’s ordered and cut per job, so the match is right.
If your Fairfield addition or ADU needs a Silestone top replaced, re-cut, or installed new, call Bradford Remodeling Co Fairfield at (833) 998-3242 for a free estimate. You’ll get a written price before any work starts, a live person on the line any hour, and a signature guarantee at close.
Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield and nearby areas.












