A Bradford company - serving Fairfield, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Unilock · Fairfield

Unilock Kitchen Remodeling in Fairfield, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fairfield
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A dining nook with a built-in banquette
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Unilock Kitchen Remodeling: The Fairfield Owner’s Guide

Unilock kitchen remodeling in Fairfield runs $14,000 – $45,000 installed, depending on cabinet line, surface choice and how much layout work the room needs. We install Unilock-compatible systems alongside KraftMaid, Cambria and Silestone, with a written price before any work starts. If you’re pricing a failing or dated kitchen component, that range is the honest starting point for Fairfield, not a teaser number.

Call (833) 998-3242

Owners usually find the problem the same way: a cabinet door that won’t close flush, a drawer that grinds on the fourth pull, or a countertop seam that has started to darken within a year of a previous install. Unilock makes a range of kitchen and surface components, and the failure almost always traces to how the part was specified and set, not to the brand name on the box.

Which Unilock Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Unilock’s kitchen and surface lines are grouped by series, and the series determines the sizing system you need to match. The most common compatibility gotcha we see in Fairfield is a homeowner measuring the old part and ordering the same number, unaware that Unilock revised the profile on later series runs. Same nominal size, different tolerance. It fits on paper and doesn’t fit in the cabinet.

To identify the right part, start with the label on the inside of the cabinet box or under the countertop edge, which carries the series and run date. If the label is gone, measure the opening and the mounting pattern, not just the face. Photograph both with a tape in frame. With that, a supplier can cross-reference the series instead of guessing.

The OEM-versus-aftermarket call matters here. A genuine Unilock replacement keeps the original fit and finish, but lead time and price both run higher. A quality aftermarket equivalent can work well for hidden hardware, where nobody sees the part and the tolerances are standard. For visible surfaces, stay with the OEM or a documented premium brand. Bradford Remodeling Co Fairfield is an independent service provider and is not affiliated with Unilock.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Unilock Kitchen Remodeling Is Failing

  • Doors that hang and rub at the top corner. Usually a hinge that has lost its setting or a cabinet box that wasn’t shimmed square at install. Both are fixable before the door face gets chewed up.
  • Drawers that grind or pull out of square. The slide is worn or the mounting screws have pulled from a substrate that was never properly anchored. In Fairfield’s inland heat, undersized fasteners loosen faster than homeowners expect.
  • Dark lines or lifting at a countertop seam. Moisture has reached the joint, which means the seam was never set correctly to begin with. Left alone, it stains the substrate under the surface.
  • Backsplash tile popping or grout cracking in a straight line. The wall behind it is moving, or the tile was set over a surface that wasn’t prepped. This is a substrate problem wearing a cosmetic disguise.
  • Soft spots or swelling at the cabinet base near the sink. A slow leak has been running under the cabinet for months. By the time the panel swells, the substrate under it is usually compromised too.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A walk-in shower with large-format tile and a built-in niche

In Fairfield, the installed ranges break down like this: full kitchen remodel $14,000 – $45,000; small kitchen remodel $9,000 – $20,000; cabinet installation $4,000 – $13,000; countertop installation $2,000 – $6,500; backsplash installation $800 – $2,500; kitchen island installation $3,000 – $10,000.

Work Installed range (Fairfield)
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Island installation $3,000 – $10,000

What drives the range: cabinet grade and count, whether the layout moves (plumbing and electrical rough-in add real cost), surface material, and how much of the old substrate has to come out. We give a written price before any work starts, part and labor itemized so you can see exactly what the replacement costs and what the installation costs. Every completed project carries the 365-Day Done Right Promise. If the work fails inside that year, we come back and correct it at no charge.

DIY or Call Us?

You can safely photograph the label, measure the opening and mounting pattern, and check the cabinet base for swelling or soft spots. That’s diagnostics, and it saves time on the estimate.

Where DIY goes wrong: pulling a countertop or cabinet run that’s carrying plumbing or electrical, forcing a part that doesn’t match the series, and resealing a seam over a wet substrate so it fails again in six months. Any work near the sink rough-in or a gas line is not a homeowner job. Call us and we’ll tell you plainly whether your situation is a parts swap or a bigger fix.

Call (833) 998-3242 to schedule your free estimate. A live person answers, and you’ll have a written price before anything moves.

FAQs

A remodeled family room with new windows and a window seat

How long should a Unilock kitchen component last? Cabinet hardware and slides typically give 10 – 15 years under daily use; surfaces and cabinet boxes run longer if they were set on a sound substrate. In Fairfield, inland summer heat and dry air work hardware harder than coastal climates, so expect the earlier end of that range on slides and hinges.

Can it be repaired instead of replaced? Often yes. A hinge that lost its setting, a slide with pulled screws, or a seam that can be reset are all repair jobs. A swollen cabinet base or a moving substrate means replacement. We’ll tell you which one you have after looking. Call (833) 998-3242 for a free estimate.

How long does the swap take? A hardware or single-component swap is usually a half-day to a full day. Cabinet or countertop replacement runs several days once the part is on site. We put the schedule in writing with the price. Call (833) 998-3242 to book the estimate.

How do you source the part? We match your Unilock series from the label or the measured pattern, then order through documented suppliers. Where an OEM part is on extended lead time, we’ll show you the aftermarket equivalent and the tradeoff in writing so you decide. Call (833) 998-3242 and we’ll walk you through it.

Call Bradford Remodeling Co Fairfield at (833) 998-3242 for a free estimate on your Unilock kitchen project in Fairfield. You’ll get a written price before work starts and the 365-Day Done Right Promise on every completed job.

Written by the team at Bradford Remodeling Co Fairfield, serving Fairfield and nearby areas.

Ideas for every room in the house

Built-ins, window seats, family rooms and staircases: the changes that make a whole house work better.

Read our remodeling guides
A second-story addition that matches the existing rooflineA wide opening with a new beam where the kitchen wall was removedA remodeled hall bathroom with subway tile and a floating vanityA remodeled primary suite with built-in wardrobes and a window seatA garage converted into a guest room and home officeA remodeled hall bathroom with patterned floor tile and painted walls

Explore more remodels

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Bradford in Fairfield

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Fairfield team

A local vetted partner works across Fairfield and the towns around it, to the same written standard as every Bradford job.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 998-3242
Local Service Coverage

Request a Free Estimate in Fairfield

Tell us what you need - Bradford Remodeling Co Fairfield responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch