Last updated November 17, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Construction Cost Breakdown: The Fairfield Homeowner’s Reference for 2026
Two Fairfield kitchen bids, one at $45,000 and one at $62,000, can describe the exact same scope of work. The cabinets are the same. The countertop is the same. The difference is almost always buried in what the lower bid deferred to a change order rather than priced upfront. The lower number isn’t cheaper; it’s just an earlier number. What follows is a line-by-line reference to what you’re actually paying for in a Fairfield remodel, why those costs are moving the way they are, and how to read a bid so nothing surprises you at the door.
Quick Answer
Remodeling costs in Fairfield, CA in 2026 are driven by tight Solano County labor markets, long lead times on specific kitchen and window SKUs, and permit fees that have risen faster than inflation. A mid-range kitchen remodel runs $55,000 to $85,000, a full bathroom $18,000 to $32,000, a room addition $180 to $340 per square foot, and an ADU $120,000 to $220,000 all-in. A bid that doesn’t itemize labor, materials, allowances, and permits is hiding one of these costs from you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- Solano County Labor Rates by Trade in 2026
- Fairfield Permit Fee Schedules for 2026
- Material Cost Benchmarks for the Highest-Variance Line Items
- How to Read Allowance Line Items in a Bid
- Overhead and Profit: Why the Low Bid Usually Isn’t Cheap
- The One-Page Bid Checklist
Solano County Labor Rates by Trade in 2026
Labor is the single largest line item in any Fairfield remodel, and it’s the one most bids bury inside a lump sum. When we build a written price, we itemize labor by trade so you can see what’s actually being paid for skilled hands. Here’s roughly what trade rates run in Solano County in 2026, at the journeyman level:
- Framing: $65 to $95 per hour, or $8 to $14 per square foot for open framing.
- Electrical: $95 to $140 per hour. Panel work and rough-in at the higher end.
- Plumbing: $105 to $155 per hour. Repipes and rough-in separate from finish.
- Drywall and finish carpentry: $70 to $105 per hour.
- Tile: $75 to $120 per hour, or $12 to $28 per square foot for installation.
The distinction contractors don’t always disclose: an apprentice is billed at roughly 50 to 60 percent of a journeyman’s rate, but the crew is often billed as one blended number. Ask which trades have a journeyman on site and which don’t. The Solano labor market has tightened since 2023, and wages have moved up with it. That’s not a Fairfield problem alone; it’s regional. But a bid priced at 2022 labor is a bid that will find its money somewhere else.
Our technicians have up to 22 years of experience, and we’re honest that the crew you get on a given day is only as good as the trades behind it. That’s why our estimates name the trade and the rate, not just “labor.”
Fairfield Permit Fee Schedules for 2026
Permit fees in Fairfield are one of the fastest-moving line items in a 2026 construction budget, and most bids don’t itemize them. The City of Fairfield Building Division charges based on valuation, with administrative and plan-review fees stacked on top. For the most common remodel types, plan on these ranges:
- Kitchen remodel (cosmetic, no structural): $550 to $1,200 total permit cost.
- Bathroom remodel: $350 to $850.
- Room addition: $2,500 to $6,500, plus school and park impact fees that can add 30 to 60 percent to the base.
- ADU (accessory dwelling unit): $4,000 to $9,500, plus water and sewer connection charges that vary by lot.
Those ranges have moved up since 2023. Fairfield, like most Solano cities, reindexed plan-review and inspection fees to cover staff costs, so the fee schedule is no longer a rounding error on a small job. Two things to check on any bid:
- Is the permit fee itemized at actual cost, or is it a flat “permit allowance” of a few hundred dollars that will get revised up the first week?
- Does the bid list whether the contractor is pulling the permit in their name or asking you to do it? On a properly run job, the licensed contractor pulls the permit. If they don’t, that’s a red flag that shows up long before final inspection.
Fairfield also requires separate electrical and plumbing permits when those trades are touched beyond like-for-like replacement. A bid that prices one combined permit is underpricing the job by hundreds of dollars.
Material Cost Benchmarks for the Highest-Variance Line Items
Four material categories in a Fairfield remodel swing enough to blow a budget on their own: cabinets, windows, roofing, and tile. Here’s what to expect in 2026, and what drives each number.
Cabinets
Range: $180 to $650 per linear foot, installed. Stock cabinets from a builder-grade line sit at the bottom. Semi-custom from a documented brand like KraftMaid or Wellborn runs $280 to $450. Fully custom climbs from there. The variance factor is door style, finish, and lead time, not just box quality. Cabinet lead times in Fairfield have shortened from 2023 peaks but still run 6 to 11 weeks for semi-custom.
Windows
Range: $550 to $1,400 per unit, installed, depending on size and glass package. Double-pane vinyl at the low end; aluminum-clad wood or premium vinyl at the top. Solano County’s summer heat pushes most Fairfield homeowners toward a low-E glass upgrade, which adds $80 to $180 per window. Order lead time runs 5 to 9 weeks for most premium lines.
Roofing
Range: $8.50 to $16.50 per square foot, installed, for asphalt shingle. Architectural shingle from GAF, CertainTeed, or Owens Corning sits in that range. The variance factors are tear-off layers, decking condition, and whether the job is a re-roof over existing materials (rarely approved in Fairfield now) vs. a full tear-off. Roofing lead time is short relative to cabinets and windows, but a rainy winter can push scheduling into spring.
Tile
Range: $8 to $32 per square foot for material, plus $12 to $28 per square foot installed. Porcelain at the low end, natural stone at the top. Slab thickness, subfloor prep, and pattern complexity (large-format, herringbone, or mosaic) each add labor.
None of these numbers are guesses. We document the exact SKU, quantity, and lead time in every written price before work starts, so the number doesn’t move when the truck arrives.
How to Read Allowance Line Items in a Bid
An allowance is a placeholder number in a bid that says “we’ll spend approximately this much on a given item, and if it costs more, you pay the difference.” Allowances are legitimate line items when they’re realistic. They’re where the most common cost underestimates in a Fairfield remodel get buried.
Here’s what realistic allowances look like in this market right now:
- Tile allowance: $8 to $14 per square foot for a real selection, not $3. A $3 tile allowance forces you into the builder-grade aisle or a change order.
- Plumbing fixtures: $1,800 to $3,500 per bathroom for a Kohler or Moen package. Bids that carry a $600 fixture allowance are pricing the job as if you’ll pick the cheapest vanity faucet on the shelf.
- Lighting: $600 to $1,400 for a typical kitchen. Cheap allowances here force a mid-project conversation.
- Countertops: $65 to $110 per square foot installed for quartz from a documented line like Cambria or Caesarstone. A $30/sf allowance is not the same countertop.
- Paint: $2.50 to $4.50 per square foot of wall area, with a clear statement of how many coats and which brand.
Ask on every bid: does the allowance reflect what you actually intend to install, or is it a placeholder? A written price from us carries allowances that reflect the actual selections we’ve already discussed. If the number on the page is $85,000, the number at close is $85,000.
Overhead and Profit: Why the Low Bid Usually Isn’t Cheap
A legitimate licensed contractor in Fairfield carries overhead that a low-bid operator doesn’t: liability insurance, workers’ comp, vehicle and tool costs, permit runner time, office staff, warranty reserves. Add 10 to 20 percent profit on top. That structure puts a healthy contractor’s overhead-and-profit in the 25 to 35 percent range of total job cost. That’s normal. That’s what funds the ability to come back if something fails.
A bid that comes in 30 percent below the field usually isn’t just “efficient.” What’s missing:
- Insurance in force. If a worker gets hurt on your property without workers’ comp, that exposure can land on your homeowner’s policy.
- A warranty reserve. If the contractor has no margin to come back, they won’t.
- Labor priced at apprentice rates for work that requires a journeyman.
- Permit fees, allowances, or disposal costs deferred to a change order.
Every completed Bradford project carries the 365-Day Done Right Promise: if the work fails inside a full year, we come back and correct it at no charge. That guarantee is funded by pricing the job correctly the first time. A bid that can’t fund a comeback is a bid that can’t promise one.
The One-Page Bid Checklist
Use this to compare bids apples to apples. Every bid you receive for a Fairfield remodel should answer all seven questions in writing before you sign anything.
- Is labor itemized by trade, with journeyman vs. apprentice noted?
- Are permit fees shown at actual cost, and does the contractor pull them?
- Are allowances realistic for Fairfield market pricing, with the brand or SKU named?
- Is the overhead and profit line visible, or is it buried in a lump sum?
- Are material lead times in the schedule, or does the bid promise a date it can’t hold?
- Is there a written guarantee, with a duration and scope, or a verbal promise?
- Does the price change once work starts, or is it firm?
We hold every one of these in writing on every job. That’s The Garrison Standard in practice, and it’s what we mean when we say the price on the page is the price you pay. If you’re comparing a bid now and want a second set of eyes on it, bring it in. We’re happy to read it with you.
Common Mistakes to Avoid
- Comparing the bottom line instead of the line items. Two bids can be $15,000 apart and describe the same scope, because one has deferred half the real cost to change orders. Compare the itemization, not the total.
- Trusting a tile allowance under $5 per square foot. In Fairfield, that puts you in the builder aisle or in a change order before the first tile is set.
- Accepting a bid that doesn’t name the permit fee. Fairfield’s 2026 fee schedule on an addition runs into the thousands. If the bid shows “permit included” without a number, that number is either wrong or already hidden in overhead.
- Signing a bid with no written guarantee. A verbal promise to “come back if something’s wrong” doesn’t hold up. The 365-Day Done Right Promise is written, dated, and handed to you at job close.
- Ignoring lead times. Semi-custom cabinets and premium windows in Fairfield are running 6 to 11 weeks. A schedule that promises four weeks is a schedule that will slip.
- Paying a deposit before you have a written price. No money should move until the price is in writing and both parties have signed.
- Hiring on price alone without checking whether the crew is background-checked. Our technicians are background-checked and uniformed on every job. Not every Fairfield operator runs that standard, and it matters when a stranger is in your home for six weeks.
See the difference
Before
After
Before
After
Before
AfterWhen to Call a Professional
Some scope of work isn’t a weekend project, and calling a pro early saves you from re-doing it. Call a licensed contractor if the job touches structure, electrical panels, plumbing rough-in, gas lines, or roofing at height. Those four categories are where homeowners get hurt and where Fairfield inspection failures most often happen. Also call for any job that needs a permit, which is most projects above cosmetic surface work. And call if you’re sitting on two or three bids that look identical on the bottom line but don’t itemize anything, so you can’t tell what’s actually being priced. Bradford Remodeling Co Fairfield offers free estimates in Fairfield. Call (833) 998-3242 and we’ll put a written price in your hand before any tool comes out.
Frequently Asked Questions

A mid-range kitchen remodel in Fairfield runs $55,000 to $85,000 in 2026, including cabinets, countertops, appliances, labor, and permits. A higher-end kitchen with custom cabinetry and premium surfaces lands between $95,000 and $140,000. The biggest variables are cabinet line and whether the layout changes plumbing or electrical. Call (833) 998-3242 for an exact quote on your kitchen; estimates are free.
Not with us. Every Bradford project carries a written price before work starts, and that price doesn’t move at the door. On the rare occasion a homeowner changes the scope mid-job, we price the change in writing and both parties sign before the work continues. For a fuller look at how this works in practice, see our general contractor work in Fairfield.
Yes. On every permitted job in Fairfield, the licensed contractor pulls the permit in their name, and the permit fee is itemized at actual cost in the written price. We don’t ask homeowners to pull their own permits, and we don’t quote flat “permit included” numbers that get revised up after the first inspection.
A full bathroom remodel in Fairfield runs three to five weeks on a typical schedule, assuming tile, fixtures, and a shower door are selected before work starts. Custom vanity lead times can extend that to six or seven weeks. A same-day or weekend bathroom is not a real bathroom remodel; be wary of any bid promising otherwise.
The low bid is usually low because it’s deferred cost to a change order, priced labor at apprentice rates, or understated allowances. Our kitchen remodeling in Fairfield and bathroom remodeling in Fairfield pages each show what a properly itemized bid looks like in this market. Call (833) 998-3242 for a written price you can compare line by line.
An ADU permit in Fairfield runs $4,000 to $9,500 in 2026, plus water and sewer connection charges that vary by lot. Total ADU cost all-in runs $120,000 to $220,000 depending on size and whether it’s attached or detached. The permit line is one of the easiest to misprice; ask for it broken out separately on any bid you receive.
The Bottom Line
A Fairfield remodel in 2026 costs what it costs because three forces have moved in the same direction: Solano labor rates at journeyman billing, long lead times on cabinets and windows, and Fairfield permit fees that have risen faster than inflation. A bid that itemizes those forces is a bid you can trust. A bid that glosses them is a bid that will find the money later. Start with our Bradford Remodeling Co Fairfield home to see how we operate, and see our bathroom remodel work in Fairfield for what a properly itemized scope looks like on the page. Call (833) 998-3242 for a free estimate, and we’ll hand you a written price with every line accounted for, before any tool comes out. Live person answers, 24/7.
Written by the team at Bradford Remodeling Co Fairfield.


